To straighten a piece after twisting, place it in the vise on the diamond and straighten, then on the square and straighten.
Tip:To straighten a piece after twisting, place it in the vise on the diamond and straighten, then on the square and straighten. |
Directions to Linda Holmes-Rubin's shop3257 Fincher Road, Canton GA 30114. The phone is 770-479-7837. From 515/575, Jasper area & north. Go south on 515/575 to the Hwy. 108/Waleska Road exit. Go west/south on 108 through Waleska and the 108/140 4-way stop. Go approx. 6 miles. As soon as you cross Moores Mill Bridge, look for the first drive on the right, 3257 Fincher Road. Fincher Road and Hwy. 108 are the same. From 575. Take Canton exit 16 from 575 to 20/5/140 toward Canton. This will dead-end at the K-Mart. Go left and stay in the right lane past the strip mall when Hwy. splits off to the left. You will be on Hwy. 20 going west. Go approximately 9 miles to Hwy. 108/Fincher Road. Turn right. Go approximately 3.3 miles to 3257 Fincher Road. If you cross Moores Mill Bridge, you went too far. Riverstone Parkway west from 575 will also get you to Hwy. 20 and the rest is the same. From 75. Go to exit 290, Canton/Cartersville and go east on Hwy. 20 towards Canton. Go approximately 9 miles to Hwy. 108/Fincher Road. Turn left. Go 3.3 miles to 3257 on the left. The driveway is steep! Go slow. You will also cross a shallow creek up to the house. Don't worry unless there is a heavy rain, then bring a boat! |
User login |